Janome Continental M17 Instruction Book page 71

c
q
v
c Start sewing again, and the machine sews the front
bartack and right side of the buttonhole.
Stop the machine when you reach the ending point.
Then press the reverse button q.
v Start sewing again, and machine sews the back
bartack and locking stitches then stops automatically
with the needle in the up position.
hen the uttonho e is finished a message i
appear.
To make the next buttonhole, position the fabric and
start sewing again. The message disappears and the
machine se s another uttonho e identica to the first
one then stops automatically.
To sew another buttonhole in a different size press the
X key on the dialog box.
NOTE:
• To cut the buttonhole opening, refer to the
instructions on page 65.
• The memorized length will be cancelled if the
presser foot is raised or the startover key is pressed
before buttonhole is completed.
69