Advertisement
1. Mower deck
2. Drill the 4 holes (13/32
inch) here.
3. Template with the number
72 in it
5.
Install the new blower hinge with 4 bolts (3/8 x 1
inch) and 4 locknuts (3/8 inch) using the drilled
holes
(Figure
5).
1. Mower deck
2. Bolt (3/8 x 1 inch)
3. Locknut (3/8 inch)
Model 31213
1.
Install the metal template to the mower deck
with the previously removed carriage bolts and
nuts using the existing holes in the mower deck
(Figure
6).
Figure 4
4. Template location on
mower deck
5. Nuts
6. Carriage bolt
Figure 5
4. Blower hinge
5. Drilled holes
Note:
Make sure that the carriage bolts and
nuts are tight and that the template is tight
against the mower deck.
2.
Center punch the new mower deck hole
locations using the 3 holes in the template
(Figure
6).
3.
Remove the metal template and drill 3 pilot holes
(1/8 inch) with a sharp drill bit
4.
Drill 3 holes (13/32 inch) holes into the pilot
holes with a sharp drill bit
g033910
1. Mower deck
2. Drill 3 pilot holes (1/8 inch)
here.
3. Template with the number
60 in it
5.
Install the new blower hinge with 3 bolts (3/8 x 1
inch) and 3 locknuts (3/8 inch) using the drilled
holes
(Figure
6.
Install the anti-scalp roller to the blower hinge
g033908
with the previously removed axle bolt (3/8 x
4-1/2 inches), spacer, bushing, and flange nut
(3/8 inch); refer to
5
(Figure
(Figure
6).
Figure 6
4. Template location on
mower deck
5. Nut
6. Carriage bolt
7).
Figure
7.
6).
g011122
Advertisement
