Weekly - Sanitizing Dispense Parts - Cornelius McDonald's QLT-2000 HC Installation & Service Manual

Weekly – Sanitizing Dispense Parts
1. Perform the DAILY Cleaning Procedures
2. Disconnect mixing chambers from concentrate pouch tubes and remove mixing cham-
bers.
Remove the chambers by pulling it firmly toward you.
!
WARNING:
Do not open the pump while the concentrate tube is disconnected from the mixing
chamber.
3. Remove the lids by rotating them counter-clockwise from the mixing chamber bodies
prior to sanitizing.
4. Wash the mixing chamber, nozzle, and static mix at the three-compartment-sink. Be
sure all pulp is removed. Rinse with hot tap water and sanitize the parts.
5. Reassemble the mixing chambers and reconnect to concentrate pouch tubes into the
juice dispenser.
6. Reinstall nozzles and static mixers into the juice dispenser.
7. Wipe down the outside of the cabinet and the splash panel with a clean, sanitized towel
sprayed with McD APSC solution.
8. Press the dispense button to fill a small cold-drink cup with juice. Discard the juice.
© 2011-2013, IMI Cornelius Inc.
Quest Elite QLT 2000 HC & Quest Elite QLT 2000
- 15 - Publication Number: 620054882