Table of Contents
Advertisement
Quest Elite QLT 2000 HC & Quest Elite QLT 2000
Weekly – Checking Ratios
1. Turn the nozzles to the left or right ¼ turn and pull down to remove the nozzles
and static mixers.
2. Disconnect mixing chambers from concentrate pouch tubes and remove mixing
chambers by pulling firmly toward you.
3. Verify that the concentrate pouch is not near empty, properly loaded into the
pouch holder and that the silicone tubes are properly installed in the pumps
4. Install the syrup splitter assembly and connect the silicone tube onto the syrup
tube.
NOTE: To prevent incorrect ratio readings, do not pull or stretch the sil-
icone tube while connecting to the splitter tube.
5. Close the cabinet door, place a medium cup onto the drip tray and under the split-
ter tubes. Push the Cancel/Pour button for 1 second to prime the splitter tube and
fill it with concentrate.
6. Place the RVC onto the drip tray with the water and concentrate chambers locat-
ing under the splitter tubes.
Publication Number: 620054882
- 16 -
© 2011-2013, IMI Cornelius Inc.
Advertisement
Table of Contents
