Table of Contents
Advertisement
[System] > [System] > [Date and Time]
Settings for date and time of the camera.
Current Date and Time
Displays the date and time set in the camera.
Settings
It is possible to change the date and time setting method, time zone and daylight saving time set at the initial setting.
[Settings Method]
Select the date and time setting method.
[Set manually]
Set the desired date and time in [Date] and [Time].
Set the time in 24-hour format in <hour:minute:second> order.
[Synchronize with NTP server]
Synchronizes the camera's time with the time of NTP server specified in the [Set NTP Server Settings Automatically]
which appears.
[Set NTP Server Settings Automatically]
Select one of the following setting methods:
[Disable]
Enter the IP address or host name of the NTP server in [NTP Server].
[Use DHCP]
Synchronizes the camera's time with the time of the NTP server whose address is acquired from the DHCP server.
The acquired NTP server address is displayed in [NTP Server (DHCP)].
For this setting, it is necessary to set [System] > [Communication] > [Network] > [IPv4] > [IPv4 Address Settings
Method] to [Auto (DHCP)] (P. 62).
[Use DHCPv6]
Synchronizes the camera's time with the time of the NTP server whose address is acquired from the DHCPv6
server. The acquired NTP server address is displayed in [NTP Server (DHCPv6)].
For this setting, it is necessary to set [System] > [Communication] > [Network] > [IPv6] > [IPv6] to [Enable], then
set [Auto (DHCPv6)] to [Enable] (P. 63).
77
Advertisement
Table of Contents
