Canon CR-X300 User Manual page 82

[Network Settings and Management Information]
When set to [Save], initialization will be performed except for the following settings.
• Network Settings
• NTP Server
• HTTP Server
• Host Access Restrictions
• Time Zone
• Certificates
• SSL/TLS
• Administrator Name
• Administrator Password
When set to [Do not save], all the settings will be initialized except camera's date and time.
Since the network settings will be initialized, it will not be possible to connect to the camera. Use the Camera Search Tool to
configure the default settings.
[Restore Default Settings]
After rebooting, according to the setting in [Network Settings and Management Information] to restore the default settings.
Note
• Before clicking [Execute] in [Restore Default Settings], it is recommended to back up the current settings.
• It is possible to restore the factory default settings by using the RESET switch, but be aware that all the settings except the camera date
and time will be restored to the factory default settings (P. 96).
82