Other Functions Settings - Canon CR-X300 User Manual

Other Functions Settings

Performs color bars output, output to external devices, and operation of wiper and washer (sold on the market).
[Color Bars]
Outputs color bars for adjustment of color and brightness of the external monitor.
Set the types of color bars in [System] > [System] > [Camera] > [Color Bar Type].
[Wiper]
Operate the wiper in order to remove the water droplets or dust adhered on the lens protector.
By clicking [Execute], the wiper makes one to-and-fro movement and stops.
[Washer]
Operates a washer (sold on the market).
By clicking [Execute], after sending a signal for water discharge to the washer, the wiper operates. Sends stop signal to the
washer during the wiper operation.
Note
Presets cannot be called while the washer is in operation.
[AUX OUT]
Outputs signal to external devices.
Set the operation mode of the output terminal in [System] > [System] > [Camera] > [AUX OUT].
[AUX IN]
Displays the status of the contact input signal from the external device.
: Input active status
: Input inactive status
51