Installation; Location; Tools Required For Installation; Assemble The Proportioner - Graco Reactor E-20 Standart Operation

Installation

Installation Installation

Location

Location Location
For ease of operation and maintenance, ensure
there is adequate lighting in the area the Reactor
is installed for visibility and safety.
For ease of operation and maintenance, ensure
there is adequate space to the front and sides
of the Reactor to access valves or use wrenches
and tools.
Tools Tools Required Tools Required for Required
9/16 in. socket or wrench
Assemble Assemble Assemble the the Proportioner the Proportioner Proportioner
Reactor proportioners arrive in a shipping
configuration. Before mounting the system,
assemble the proportioner in the upright
position.
1. Remove the enclosure pivot arm screws (ES).
2. Lift the electrical enclosure (EE).
3A8500C
for Installation for Installation Installation
3. Place the left and right wall mounting
brackets (MB) as shown in Fig.
enclosure pivot arm screws (ES) through
the brackets (MB) and tighten to secure the
enclosure.
Figure 4 Install Wall Mounting Brackets
Installation
Fig. 4. 4. 4. Insert the Fig.
23