Malfunction
E:90-01 lights up alternately.
E:92-40 lights up alternately.
Another error code
appears in the indicator
window.
E:01-00 to E:90-10
Washing result
Malfunction
Crockery is not dry.
Cause
Mains voltage is too low.
Strainers are dirty or clogged.
There is a technical
malfunction.
Cause
No rinse aid has been
used or the dosage is
set too low.
The program or program option
has no drying phase or a drying
phase that is too short.
TroubleshootingNL
Troubleshooting
There is no error in the device.
Contact an electrician.
1.
Have the mains voltage and electrical
2.
installation checked by the
electrician.
▶
Clean the sieves.
"Cleaning sieves", Page 42
Press .
1.
Unplug the appliance from
2.
the mains or switch off the
fuse.
Wait at least 2 minutes.
3.
Plug the appliance into a
4.
mains socket or switch on
the fuse.
Turn on the device.
5.
If the problem occurs
6.
again:
Press .
†
†
Close the tap.
†
Remove the plug from the
socket.
Contact the "service
†
department"
→
Page 61and state the
error code.
Troubleshooting
Fill the "rinse agent"
1.
→
Page 26Bee.
Set the amount of rinse aid.
2.
"Setting the rinse aid
amount", Page 27
▶
†Select a program with drying, e.g.
Intensive, Strong or ECO
programme."→ Page 18
47