Table of Contents
Advertisement
NLTroubleshooting
Malfunction
E:9001 is on.
E:9240 is on.
Another error code
appears in the indicator
window.
E:0100 to E:9010
Washing result
Malfunction
Crockery is not dry.
50
Cause
Mains voltage is too low.
Strainers are dirty or clogged.
There is a technical
malfunction.
Cause
No rinse aid has been
used or the dosage is
set too low.
The program or program option
has no drying phase or a drying
phase that is too short.
Troubleshooting
There is no error in the device.
Contact an electrician.
1.
Have the mains voltage and electrical
2.
installation checked by the
electrician.
▶
Clean the sieves.
"Cleaning sieves", Page 45
Press .
1.
Unplug the appliance from
2.
the mains or switch off the
fuse.
Wait at least 2 minutes.
3.
Plug the appliance into a
4.
mains socket or switch on
the fuse.
Turn on the device.
5.
If the problem occurs
6.
again:
Press .
†
†
Close the tap.
†
Remove the plug from the
socket.
Contact the "service
†
department"
→
Page 64and state the
error code.
Troubleshooting
Fill the "rinse agent"
1.
→
Page 30Bee.
Set the amount of rinse aid.
2.
"Setting the rinse aid
amount", Page 31
▶
†Select a program with drying, e.g.
Intensive, Strong or ECO
programme."→Page 20
Advertisement
Table of Contents
