Operating Basics; Switching Power On/Off; Adjusting Volume; Adjusting Squelch - Kenwood TH-G71E Instruction Manual

1

SWITCHING POWER ON/OFF

1 Press the PWR switch (1 s) to switch ON the
2
transceiver.
• A beep sounds.
3
4
5
1s
6
2 To switch OFF the transceiver, press the PWR switch
7
(1 s) again.
8

ADJUSTING VOLUME

9
Turn the VOL control clockwise to increase the audio
level and counterclockwise to decrease the audio level.
10
11
12
13
If background noise is inaudible because of the Squelch
•
function, press and hold [MONI], then turn the VOL control.
14
While pressing [MONI], you will hear background noise.
15
8

OPERATING BASICS

ADJUSTING SQUELCH

The purpose of the Squelch function is to silence
background noise output from the speaker (squelch
closed) when no signals are present. When the squelch
level is set correctly, you will hear sound (squelch
opened) only while a station is actually being received.
1 Press [F], [1].
• The current squelch level appears. The default is level
2.
2
2 Turn the Tuning control to select the squelch level in
the range 0 to 5.
• Select just the level at which the background noise is
eliminated when no signal is present.
• The larger the level number you select, the stronger the
signals you need to receive to hear.
3 Press any key other than [LAMP] and [MONI] to
complete the setting.
1