Installing The Antenna; Attaching The Hand Strap; Installing The Belt Hook - Kenwood TH-G71E Instruction Manual

INSTALLING THE ANTENNA

Hold the provided antenna at its base, and screw the
1
antenna into the connector on the top panel of the
transceiver until it is snug.
2
3
4
5
6
7
8
9

ATTACHING THE HAND STRAP

If you want, attach the provided hand strap to the belt
10
hook before installing the hook onto the transceiver.
11
12
13
14
15
4
q
w

INSTALLING THE BELT HOOK

Install the provided belt hook onto the back of the battery
pack or the battery case.
• To lock the cable of an optional speaker microphone, first
position the cable over the left groove on the transceiver.
Then install the belt hook. Last position the cable over the
right groove.
To remove the belt hook, pull the belt hook downward
while pushing its tabs from both sides.