Table 3-1 System - ZyXEL Communications ZyAIR B-4000 User Manual

The following table describes the labels in this screen.
LABEL
System Name
Domain Name
Location Information
Location Name
Address
City
State/Province
ZIP/ Postal Code
Country
Contact Name
Contact Telephone
Contact FAX
Contact Email
Date/Time
Get from my Computer
Get from NTP server
Use NTP (Network
Time Protocol) Time
Server
Server IP/Domain
Name
General System Setup

Table 3-1 SYSTEM

Enter a descriptive name (up to 40 characters) for identification purposes.
Enter the domain name (if you know it) here. If you leave this field blank, the
ZyAIR may obtain a domain name from a DHCP server.
The domain name entered by you is given priority over the DHCP server assigned
domain name.
Enter the device's geographical location.
Enter the street address of the device's location.
Enter the city of the device's location.
Enter the state or province of the device's location.
Enter the zip code or postal code for the device's location.
Enter the country of the device's location.
Enter the name of the person responsible for this device.
Enter the telephone number of the person responsible for this device.
Enter the fax number of the person responsible for this device.
Enter the e-mail address of the person responsible for this device.
Set the system date and time by selecting the appropriate choices from the drop-
down list boxes.
Click this button to set the time and date on the ZyAIR to be the same as the
management computer.
Click this button to set the time and date on the ZyAIR to be the same as the
management computer.
Select this check box to set the ZyAIR to get time and date information from an
NTP (Network Time Protocol) time server.
Enter the IP address or URL of your time server. Check with your ISP/network
administrator if you are unsure of this information.
ZyAIR B-4000 Hot Spot Gateway
DESCRIPTION
3-3