Lan Device Management Example - ZyXEL Communications ZyAIR B-4000 User Manual

LABEL
Device IP Address Enter the IP address of a LAN device in dotted decimal notation. For example,
192.168.1.40.
Device Server Port Enter the port number for a service (for example, 80 for HTTP) on the LAN device.
MAC Address Enter the MAC address of the LAN device in hexadecimal notation in 6 hexadecimal
pairs, for example, 0050BA8D2296.
Make sure you enter the correct MAC address.
Select an application type from the drop-down list box. Choose from TCP or UDP.
Application
Only requests for the selected application type are forwarded to the specified server
port on the LAN device.
Interface Select the ZyAIR's interface to which the LAN device is connected.
Delete All Click Delete All to clear all entries.
To delete a single entry, erase the contents in that entry.
Apply Click Apply to save the changes.

16.2.1 LAN Device Management Example

In this example, there is a manageable switch and a wireless access point behind the ZyAIR and you want
to be able to remotely access the web-based management interfaces on the manageable switch and access
point over the Internet.
LAN Devices
Table 16-1 LAN DEVICES
DESCRIPTION
ZyAIR B-4000 Hot Spot Gateway
16-3