ZyXEL Communications ZyAIR B-4000 User Manual page 150

ZyAIR B-4000 Spot Gateway
The following table describes the labels in this screen.
LABEL
Send to Syslog
Server
Syslog Server on
LAN
Server IP Address
Server MAC Address
Syslog Server on
WAN
Server 1 IP Address
Server 2 IP Address
Send to Email
Email Server
IP Address or
Domain Name
SMTP Port
E-mail (SMTP)
server needs to
check my account
Username
Password
Email From:
Name
17-2
Table 17-1 Syslog
Select Enable to activate the syslog function.
Select Disable to de-activate the syslog function.
Select this check box to specify a syslog server on the LAN.
Enter the IP address (in dotted decimal notation) of the syslog server on the LAN.
Enter the MAC address of the syslog server on the LAN.
Select this check box to specify a syslog server on the WAN.
Enter the IP address of the first syslog server on the WAN in dotted decimal
notation.
Enter the IP address of the second syslog server on the WAN in dotted decimal
notation.
Select Enable to have the ZyAIR send syslog messages to the e-mail account
that you specify.
Select Disable to not have the ZyAIR send syslog e-mail messages.
Enter the IP address or domain name of the mail server for the e-mail addresses
specified below. If this field is left blank, the syslog will not be sent via e-mail.
Enter the port number (25, or between 2500 and 2599) for the mail server. The
default is 25.
Select this check box if your SMTP server requires user name and password
authentication before accepting e-mail. Your network administrator, SMTP server
provider or ISP should supply the username and password.
Enter the username for the SMTP server.
Enter the password for the SMTP server.
Type a name that you want to be in the "message from" field of the log e-mail
message that the ZyAIR sends.
DESCRIPTION
Syslog