Bernina 475 QE User Manual page 114

Errors and faults
Message on the display
It is time for the regular
maintenance. Please contact your
authorized BERNINA dealer to
make an appointment.
114
Cause
The machine needs maintenance.
The message appears after the
programmed service interval has
expired.
Important information: Having
your machine cleaned and
serviced properly at the
appropriate times ensures its
proper functioning and a long
service life. In case of non-
compliance, the service life may
be negatively affected and the
warranty service may possibly
become limitedThe cost
allocation for maintenance work
is regulated nationally. Consult
your authorized BERNINA dealer
or your service center for more
details.
The calibration of the Buttonhole
Foot with Slide #3A has failed.
Solution
> Contact an authorized BERNINA dealer.
> Delete the message temporarily by touching the icon
«ESC».
After the third deletion, the message is not displayed until
the next service interval is reached.
> Check the presser foot for ease of movement. If
necessary, remove lint, dust and fabric remnants.
> Clean the reflector with a soft, slightly damp microfiber
cloth.
> Check the position of the reflector. If necessary, correct
the position of the reflector or replace the presser foot.
> Check the plastic on the underside of the presser foot
for signs of wear. If necessary, replace the presser foot.
> Clean the feed dog.
> If the error still occurs, contact your authorized BERNINA
dealer.