Table of Contents
Advertisement
> Tap «i-Dialog».
> Tap «Manual Length Adjustment».
man
– Step 1 is activated in the display to start the buttonhole.
> Sew the required length of the buttonhole.
– Step 2 becomes active when sewing starts.
> Stop when the required length of the buttonhole or the length marking is reached.
> Step 3 appears by tapping «Scroll down».
– The machine sews straight stitches in reverse.
> Stop the machine at the level of the first stitch where the buttonhole begins.
> Step 4 appears by tapping «Scroll down».
– The machine sews the upper bartack and stops automatically.
> Step 5 appears by tapping «Scroll down».
– The machine sews the second bead.
> Stop the machine at the level of the last stitch of the first bead.
> Step 6 appears by tapping «Scroll down».
– The machine sews the lower bartack and stops automatically.
> Step 7 appears by tapping «Scroll down».
–
The machine secures and stops automatically.
9.10 Sewing the manual 5-step buttonhole with the Buttonhole Foot #3
The length of the buttonhole is determined manually when sewing. The bartack, eye and securing stitches
are preprogrammed. The individual steps can also be selected by scrolling using the arrow icons or by
pressing the button «Quick Reverse».
Prerequisite:
•
The Buttonhole Foot #3 is fitted.
> Tap «Buttonholes».
> Select Round buttonhole with normal bartack No. 54.
> Tap «i-Dialog».
> Tap «Manual Length Adjustment».
man
– Step 1 is activated in the display to start the buttonhole.
Buttonholes
95
Advertisement
Table of Contents
