Predictive Warnings; Cautions, Warnings, And Alarms - Trane TruSense RMWH Installation, Operation And Maintenance Manual

Note: The Hold feature can only be applied to one point
at a time. During the hold duration for the selected
point, the Hold button is inactive for all other
points until the hold duration for the selected point
has completed.

Predictive Warnings

When a point goes above the acceptable threshold for flow
rate, sensor performance, or pump performance, a
predictive warning pop-up shows on the dashboard.
Predictive warnings indicate that it may be necessary to do
troubleshooting or replace a part, not that there is a critical
issue with the flow rate, sensor, or pump.
To acknowledge the predictive warning and return to the
dashboard, select Acknowledge.
RMWH-SVX001C-EN
Acknowledging the predictive warning triggers a
notification that shows on the Diagnostics button on the
dashboard.
A corresponding notification also shows on the
Diagnostics screen. For information about diagnostics,
refer to "Diagnostics," p.

Cautions, Warnings, and Alarms

Cautions, warnings, and alarms can be triggered by non-
latching or latching events. Non-latching events do not
require user interaction for resolution. Latching events
require user interaction for resolution.
When an event occurs, a pop-up shows on the dashboard.
Routine Operation
41.
31