Front Alienfx Led Boards; Removing The Front Alienfx Led Board - Alienware Aurora R13 Service Manual

Steps
1. Lay the computer on its right side.
2. Align the top-chassis fan with the slot on the chassis.
3. Push the top-chassis fan into the slot on the chassis until its releasing clip is locked into place.
4. Connect the top-chassis fan cable to the system board.
Next steps
1. Install the left-side cover.
2. Follow the procedure in

Front AlienFX LED boards

Removing the Front AlienFX LED board

Prerequisites
1. Follow the procedure in
2. Remove the left-side cover.
3. Remove the top cover.
4. Remove the right-side
5. Remove the front bezel.
After working inside your
Before working inside your
cover.
computer.
computer.
71