Entering The Service Tag In The Bios Setup Program - Alienware Aurora R13 Service Manual

5. Install the 2230 solid-state drive
6. Install the 2230 solid-state drive
7. Install the single-graphics
8. Install the memory module.
9. Install the front bezel.
10. Install the right-side cover.
11. Install the top cover.
12. Install the left-side cover.
13. Follow the procedure in

Entering the Service Tag in the BIOS setup program

Steps
1. Turn on or restart your computer.
2. Press F2 when the Dell logo is displayed to enter the BIOS setup program.
3. Navigate to the Main tab and enter the Service Tag in the Service Tag Input field.
Next steps
NOTE: Service tag is the alphanumeric identifier located at the back side of your computer.
or the 2280 solid-state drive
or the 2280 solid-state drive
card.
After working inside your
in SSD slot one, as applicable.
in SSD slot two, as applicable.
computer.
85