Alienware Aurora R13 Service Manual page 94

Table 4. System setup options—Advanced menu (continued)
Advanced
USB PowerShare in Sleep State
Auto Power On
Auto Power On Mode
Auto Power On Date
Auto Power On Time
Numlock Key
Performance Options
Overclocking Feature
Overclocking Feature
Core Over Clocking Level#
Memory Reference Clock
Memory Ratio
Memory Voltage
XMP Memory
Customization
Core Ratio Limit Override
Core Voltage Override
Long Duration PWR Limit
Short Duration PWR Limit
94
Default: Disabled
Allows you to enable front the USB devices to wake the system
from sleep state.
Default: Normal
Allows you to enable or disable Auto Power On.
Default: Disabled
Allows you to set the computer to turn on automatically every
day or on a preselected date. This option can be configured
only if the Auto Power On mode is set to Enabled Everyday or
Selected Day.
Default: Selected Day
Allows you to set the date on which the computer must turn
on automatically. This option can be configured only if the Auto
Power On mode is set to Enabled 1 to 31.
Default: 15
Allows you to set the time at which the computer must turn on
automatically. This option can be configured only if the Auto
Power On mode is set to Enabled hh:mm:ss.
Default: 12:30:30
Allows you to set the status of the Num Lock key during boot to
On or Off.
Default: Enabled
Allows you to enable or disable the Overclocking Feature.
Default: Disabled
Allows you to configure the Core Over Clocking Level.
Default: Disabled
Allows you to configure the Core Over Clocking Level.
Default: 133
Allows you to configure the Memory Ratio.
Default: Auto
Allows you to configure the Memory Voltage.
Default: Default
Allows you to configure the XMP Memory.
Default: Disabled
Allows you to configure the Core Ratio Limit Override.
Allows you to configure the Core Voltage Override.
Allows you to configure the Long Duration PWR Limit.
Allows you to configure the Short Duration PWR Limit.