Hearth and Home Technologies IntelliFire Touch IFT-RC400 Installation Instructions Manual page 9

3. Operation
Introduction
This operation section serves as a quick reference to the
screen, functions and indicators on your IntelliFire Touch
remote control.
SCREEN SCREEN
INDICATOR BAR
ROOM TEMPERATURE
Fan Speed
FUNCTIONS
DYNAMIC ICONS
FUNCTIONS FUNCTIONS
Turn Flame On/Off
Toggle this function to turn ON or OFF your appliance.
Note: The display will remain illuminated if you hold a
finger on the screen. When you are ready to
make your next selection, you must remove your
finger and then continue with your next selection.
9 Hearth & Home Technologies • IFT-RC400 & IFT-ACM Installation Instructions • 2326-982 Rev. Q • 4/21
DISPLAY
SELECTION
INDEX
4
3
2
1
OFF
Thermostat
You can set and maintain your desired room tempera-
ture with the thermostat function. This function automati-
cally adjusts your appliance to maintain the desired set
temperature (ST).
To achieve the most accurate thermostat function, locate
your IFT-RC400 remote control in the same general space
that you want to have the temperature controlled by your
appliance. For best results, keep your IFT-RC400 control
away from direct radiant heat from the appliance, adja-
cent windows and doors, HVAC vents, and direct sunlight.
To use the thermostat function, access the main menu
screen on your remote, and select thermostat. Next, sim-
ply select your desired set temperature by using the ar-
row keys and press ON to confirm the setting. The actual
room temperature (RT), measured by your IFT-RC400
remote, will be displayed in the upper right corner of the
main menu screen. To turn the thermostat function off,
simply select thermostat on the main menu screen and
select OFF.
If the RT cools to more than 2 °F lower than the ST for
at least 2 minutes, then your appliance will automatically
turn ON. The thermostat function will automatically adjust
the flame height based on the difference between the RT
and the ST. As the RT rises closer to the ST, the flame
height will automatically adjust down. If the RT rises 2 °F
above the ST for at least 2 minutes, then your appliance
will automatically turn OFF.
During thermostat use, you will not be able to set your
desired flame height level. Your appliance will automati-
cally adjust flame height based on the difference between
the RT and ST.
Flame Height
You can set your desired flame height level to affect the
ambiance and control the heat output.
Your appliance will remember the previous flame height
setting and adjust the flame to that level 10 seconds after
start.