Terminating Do-No-Disturb Interrogation - Siemens HiPath 4000 Operating Instructions Manual

Do-not-disturb group
Step by Step
ENTER
PROG
56
Activating/deactivating do-not-disturb
You called up a station group with do-not-disturb.
To change groups individually: press group number 1 to 8. To change
all groups together: press 0.
Press Memory input.
The ON/OFF or OFF/ON state change is stored. The message
STORED appears in line 12.
NOT POSSIBLE appears if an unavailable group was selected.

Terminating do-no-disturb interrogation

If 5 seconds have elapsed since an entry was performed, the
Program menu is displayed.
You can retrieve the list by pressing 4 or terminate the interro-
gation.
Press Program menu or answer a new call.
The memory inquiry is terminated.