Alarm; Interrogating Alarm Display(S); Canceling Alarm Display(S) - Siemens HiPath 4000 Operating Instructions Manual

Attendant console ac4

Hide thumbs Also See for HiPath 4000:

Table of Contents

Step by Step

ALARM

CLEAR

Alarm

Faults are indicated by flashing of the LED above the alarm key. Minor

faults are signaled by a slow flashing sequence (general alarm). Faults

which must be reported to Customer Service immediately are sig-

naled by a rapid flashing sequence (urgent alarm).

If the LED does not flash but remains lit, this indicates that another

attendant position is currently querying the alarms.

Before you notify Customer Service in the event of a line fault, you

should first find out the number of the trunk Æ page 50.

Press Alarm.

The cause of alarm with page number (+1) is displayed in memory lay-

out.

Line 1

ALARM

Line 2

NUMBER OF ALARMS

Line 3

ADS OUT OF SERVICE or other alarm display

If there is more than one alarm cause:

press * to scroll forwards to pages 2+, 3+, 4+, to 10-,

press # to scroll backwards.

Alarms are also logged on service terminal.

The cause of the alarm with page number is displayed in memory lay-

out.

Press Clear.

The alarm display is cleared. The system advances automatically to

next display.

Alarm

Table of Contents