Override; Releasing A Connection - Siemens HiPath 4000 Operating Instructions Manual

Extending a call
Step by Step
EXTEND
RLS
22

Override

If BUSY, NOT AUTHORIZED or DO NOT DISTURB is displayed
when extending a call to a destination user, you can still reach this
user with the override function.
ON HOLD appears on the left and FREE on the right in line 9 when
the busy party hangs up.
Press Call transfer if neither NO CONNECTION POSSIBLE nor
PROTECTED are displayed.
You are now connected to the destination station. Both caller and
destination user can hear your announcement.
e.g. 223 (destination dialed)
If call forwarding to Voice Mail Service is active, the message AN-
SWERED is displayed.
The displays in lines 5, 6 and 9 are cleared after the call is extended.
If the call is unsuccessful, the reason is displayed:
Line 9 BUSY EXTERNAL or INTERNAL
NOT AVAILABLE
NOT POSSIBLE/NO NUMBER STORED
NOT AUTHORIZED
DO NOT DISTURB
Line 10 CALL WAITING*
Line 11 NO CONNECTION POSSIBLE
* A call cannot be extended if another caller is waiting for the station user to hang up.
If a speed calling code is not stored, the message NO NUMBER
STORED appears in line 9.

Releasing a connection

If you are unable to extend a caller, clear down the call.
Press Connection release.
The connection is cleared down, the call is terminated.