Advertisement
manual）
(3). When the "Manual/Automatic" in the right yellow part to
"Manual" place, the motor "up/down" to control the linear
actuator in the front of the machine, up and down the vibration
leveling plate（Attention: need press the handles, that will
come when the machine is not move; the machine will
fluctuate up and down as the gravity when no person work on,
this usually used for the "Automatic", the machine will adjust
the leveling self-motion）
2. Machine Automatic mode Instruction
(1). You can start the Automatic mode when the machine
already in the working place, and had finished the
adjustable of the receiver in two side of the vibrating plate.
(2). Switch two "Manual/Automatic" to place "Automatic", the
machine is in automatic mode.（Strictly prohibited to use
the automatic mode in any case, only use to working and
adjust the receiver）
5.3 Machine working process
1. Control the left operation handle, make sure
2. accessible around, turn the walking direction to the
"forward", then turn the knob "speed" the right hand
clockwise, turn to a proper speed, then move the machine
to construction region （ if turn a corner, please press the
knob the left-handed rotation / dextroversion in two flanks
Tel:(+86)17737606271
17
Henan Master Machinery Co., Ltd
www.mastermachinerys.com
Advertisement
