Advertisement
5.2 Automatic mode/Manual mode of machine
1. Manual mode operation instructions
"Manual/Automatic" selector switch on the operation
frame,corresponding to "upper eft/left
(1). lower""upper right/low right"和"up/down" those three
switch。 （Drawing the corresponding range with yellow line in
the operation frame）, as picture 5.10:
(2). When the "Manual/Automatic" in the left yellow part to
"Manual", push "upper left/left lower" "upper right/low right"
to control the left/right linear actuator, to control the both side
of the vibrating plate floating up and down（this only for
correct the laser receiver in both side of the scraper blade by
Tel:(+86)17737606271
5.10 "Manual/Automatic" selector switch
Henan Master Machinery Co., Ltd
www.mastermachinerys.com
16
Advertisement
