Invacare TDX Series Owner's Manual page 46

SECTION 4
ADJUSTING THE ANGLE OF THE CENTER MOUNT
ADJUSTABLE KNEE ANGLE FOOTREST (FIGURE 17)
After adjusting the Center Mount Adjustable Knee Angle Footrest, mini-
mum ground clearance for the footrest in the driving position is 3-inches. If
the Center Mount Adjustable Angle Footrest is in the retracted position and
the chair is not moving, the footrest MUST maintain a minimum of 1 - inch
ground clearance - otherwise personal injury and damage may result.
1. Engage the release lever with one hand (not
shown) and move the center mount foot-
rest to the desired angle with the other
hand.
NOTE: Refer to FIGURE 16 for the location of the
release lever.
2. Disengage the release lever (not shown) to
lock the center mount footrest in the new
position.
ADJUSTING THE FOOTPLATE
ANGLE (FIGURE 18)
1. Loosen the footplate mounting screw and
move the footplate to the desired angle.
NOTE: DO NOT remove the footplate mounting screw.
2. Tighten the footplate mounting screw to
secure the footplate in the desired posi-
tion.
3. Repeat STEPS 1 and 2 for the other
footplate.
ADJUSTING THE TENSION OF
THE FLIP UP FOOTPLATE
(FIGURE 19)
NOTE: The tension can be adjusted to increase or
decrease the rotation effort of the flip up footplates.
1. Loosen the mounting screw on the foot-
rest angle hinge to decrease the rotation
effort.
NOTE: DO NOT remove the footplate mounting screw.
2. Tighten the footrest angle hinge mounting
screw to increase the rotation effort.
3. Repeat STEPS 1 and 2 for the other
footplate.
TDX WHEELCHAIRS
All manuals and user guides at all-guides.com
WARNING
46
FRONT RIGGINGS
Center Mount
Footrest
FIGURE 17 - ADJUSTING THE
ANGLE OF THE CENTER
MOUNT ADJUSTABLE KNEE
ANGLE FOOTREST
Footplate
Mounting Screw
FIGURE 18 - ADJUSTING THE
FOOTPLATE ANGLE
Center Mount
Footrest
Footrest Angle
Hinge
Footrest Angle Hinge
Mounting Screw
FIGURE 19 - FLIP UP THE
FOOTPLATE
Footplate
Center Mount
Footrest
Footplate
Footplate
Part No. 1114809