Invacare TDX Series Owner's Manual page 45

All manuals and user guides at all-guides.com
FRONT RIGGINGS
Extension Tube
Mounting Holes
FIGURE 15 - ADJUSTING THE HEIGHT OF THE CENTER MOUNT
ADJUSTABLE KNEE ANGLE FOOTREST - FOR ASBA SEATS
FOR 2GTR SEATING SYSTEMS (FIGURE 16)
1. Remove the two (2) mounting screws that secure the footrest extension tube to the
extension tube housing.
*2. Remove the retaining ring on the angle adjustment pin and slide it out.
3. Adjust the footrest extension tube to the desired height and align the corresponding
holes to the mounting holes on the extension tube housing.
*4. Reinstall the angle adjustment pin and the retaining ring.
5. Reinstall the two (2)
mounting screws to
secure the footrest
extension tube to the
extension tube hous-
ing. Securely tighten.
6. Repeat STEPS 1-5 for
the other extension
tube.
*NOTE: STEPS 2 and 4 ap-
ply only to the three (3) short-
est settings for footrest
height.
Part No. 1114809
Mounting
Screws
Height Adjustment
Holes
Retaining Ring
Extension Tube
Housing
Extension
Tube
FIGURE 16 - ADJUSTING THE HEIGHT OF THE
CENTER MOUNT ADJUSTABLE KNEE ANGLE
FOOTREST - 2GTR SEATING SYSTEMS
45
Seat Frame
Release Lever
Extension
Tube
Housing
Extension
Tube
Seat Frame
Height Adjustment
Holes
TDX WHEELCHAIRS
SECTION 4
Release
Lever
Angle
Adjustment
Pin
Mounting
Screws
Extension Tube
Mounting Holes