Table of Contents
Advertisement
Room Thermostat (Remote Control
Operation)
The Remote Control can operate as a room thermostat. The
thermostat can be set to a desired temperature to control
the comfort level in a room. To activate the function, press
the Thermostat Key, see Figure 27i. The LCD display on the
remote control will change to show that the room thermostat
is "On" and the set temperature is now displayed. To adjust the
set temperature press the Up or Down Arrow Keys until the
desired set temperature is displayed on the LCD screen of the
Transmitter.
Set Temperature
Figure 27.i Setting Room Thermostat
Smart Thermostat (Remote Control
Operation)
The Smart Thermostat function adjusts the flame height in
accordance to the difference between the set point temperature
and the actual room temperatures. As the room temperature
gets closer to the set point the Smart Function will modulate the
flame down. To activate the function, press the Thermostat Key,
see Figure 27.j, until the word "SMART" appears to the right of
the temperature bulb graphic, see Figure 27j.
NOTE: When smart Thermostat is activated, manual flame height
adjustment is disabled.
Figure 27.j Smart flame function
XG0222
Room Temperature
Disabling Thermostat
Some jurisdictions and bedroom installations require the
thermostat to be disabled.
1. Partially take out one battery. Insert the battery while holding
down the thermostat button. The remote screen will display
'Clr' while the button is held down.
2. To enable thermostat repeat steps 1-2. The remote screen will
display 'set' while the thermostat button is held down.
Fan Speed Control
The fireplace is equipped with optional hot air circulating fans.
The speed of the fans can be controlled by the Proflame system.
The fan speed can be adjusted through six (6) speeds. To activate
this function use the Mode Key, see Figure 27, to index to the fan
control icon, see Figure 27m. Use the Up/Down Arrow Keys to
turn on, off, or adjust the fan speed. A single "beep" will confirm
reception of the command.
Figure 27.m Fan Speed Control
Accent Light Control
The fireplace may be equipped with accent lights. The auxiliary
function controls the Accent Lights. To activate this function use
the Mode Key, see figure 29, to index to the AUX icon, see figure
29n.
Pressing the Up Arrow Key will turn the light on. Pressing the
Down Arrow Key will turn the light off. A single "beep" will
confirm the reception of the command.
Figure 29.n Light Control
Operation
45
Advertisement
Table of Contents
