Departure Procedures - Garmin Aera 760 Pilot's Manual

DEPARTURE PROCEDURES

A Departure Procedure (DP) is loaded at the departure airport in the flight plan.
Only one departure can be loaded at a time in a flight plan. If a departure is loaded
when another departure is already in the active flight plan, the new departure replaces
the previous departure. The route is defined by selection of a departure, the transition
waypoint, and a runway.
LOADING A DEPARTURE
Loading a departure from the active or saved flight plan:
1) With the flight plan displayed, touch Menu.
2) Touch Select Departure.
3) Confirm the intended airport is displayed or touch the Airport Button, select
the desired airport, and touch Enter.
4) Touch
to select the desired departure.
5) Touch to select the desired runway.
6) Touch
to select the desired transition waypoint.
7) Touch Load Departure.
Touch the Select
Departure Button
190-02674-00 Rev. B
Touch each button to select the desired
departure, runway, and transition
Touch to load
the departure
Loading a Departure Procedure
Garmin aera 760 Pilot's Guide
Flight Planning
waypoint
89