Table of Contents
Advertisement
9.2 Monitor
Use a commercially available monitor having the specifications shown below.
Signal:
Synchro. signal:
Resolution:
Mount the monitor in portrait orientation. Note that FURUNO monitor model MU-151C can be
used in portrait orientation.
9.3 Connecting cables
Fabricate the cables as shown in the section "4.4 Cables Fabrication and Connect Assembling
in Display and Interface Units." Connect the cables, referring to the interconnection diagrams at
the back of this manual.
RGB port panel
Protective earth
Attach protective earth cable (IV-8sq, shipyard supply) between the GND terminal of the
processor unit and ship's body.
Analog RGB, 0 – 0.9 V, Positive, 75 Ω
Horizontal, TTL level, 31.687 kHz 4 Hz, 75 Ω
Vertical, TTL level, 60.111 Hz 0.007 Hz, 75 Ω
VGA, 664 x 481
DISPLAY
R
G
D-sub
B
15P
H
V
BNC
Ground terminal
Processor unit (rear panel)
CAUTION
Securely attach protective earth
to the ship's body.
The protective earth is required
to prevent electrical shock.
9-2
Port for monitor
Cable entrance
Power supply port
FUSE
5A
C
H
2
3
100 VAC
50/60Hz
1
2A
GND
Advertisement
Table of Contents
