Furuno CSH-83 User Manual [Page 25]: Cable Fabrication And Connector Assembling In Power Unit
Furuno sonar user manual.
4.5 Cable Fabrication and Connector Assembling in
Power Unit
Assembling 38P connector (CN-E1)
Fabrication of cable 10S1260
200
Shield
Vinyl sheath
Assembling the 38P connector
1. Bundle unused wires outside the connector case.
2. Fix the cover 1, noting the cable outgoing direction.
3. Dress the wires and fix the covers 2 and 3. Use a fragment of
cable sheath to fix the wires at the cable clamp.
4. Shorten unused wires and tape their ends with vinyl tape to prevent
short circuit.
Guide pin
Fragment of
anticorrosive sheath
Insulate unused
wires with vinyl
tape.
45
40
Anticorrosive sheath
Armor
Figure 4-9 Fabrication of cable 10S1260
Cover 3
Cover 2
Figure 4-10 How to assemble the 38P connector
Core
Guide Pin A
Cover 1
Position No.
Guide Pin A
(Large)
4-7
Insulating tape
Fold back shield
onto armor.
A
Cable outgoing
direction
Guide
Pin B
Guide Pin B
(Small)
TT
Comments to this Manuals
Latest comments: