16.2 Independent system
16.3 Linked operation control system
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664012-1 – 2021.08
b
a
a Controller
b Heat reclaim ventilation unit (VAM)
▪
Up to 16 units can be controlled with the controller (a system with 2 controllers
can be created using master/slave switching).
▪
All VAM operations can be used and displayed.
▪
The controller cord should be procured locally (cord length: up to 500 m).
For configuration, see
"17.3.2 Independent
Combined operation system with VRV systems and Sky Air series
1-group linked operation control system
c
a
a Controller
b Heat reclaim ventilation unit (VAM)
c Air conditioner
▪
A total of up to 16 air conditioners and VAM units can be controlled.
▪
The ventilation mode can be operated independently when air conditioners are
NOT used.
▪
Using the local setting of the controller for air conditioners, various settings such
as precool/preheat on/off, ventilation flow rate, ventilation mode, etc. can be
selected.
For configuration, see
"17.3.3 1-group linked-control
Multi-group linked operation control system
c
a
c
a
a Controller
b Heat reclaim ventilation unit (VAM)
c Air conditioner
d Adapter PCB for remote control
▪
Since all VRV units of the installation are connected to a single communication
line, they will all be operated.
▪
If there are problems operating all VRV units, do NOT use this system.
b
b
system" [
b
c
b
a
d
16
System configuration
|
4
75]
4
system" [
76].
Installer and user reference guide
65