Control System - Daikin VAM Series Engineering Data

Control System

2. Control System
System overview
Purpose / Application
Basic example of use
(Hand-operated control
using remote controller)
Perform interlock
operation of Heat
Reclaim Ventilator
Unit using a remote
controller
During intermediate
periods, independent
operation of Heat
Reclaim Ventilator
Unit is also possible
with a remote
controller.
(Independent
operation is not
available in the
case of duct direct
connection with air
conditioners)
[Central remote controller]
Up to 64 groups
can be controlled
individually with one
controller
[Unified ON/OFF controller]
Up to 16 groups can
be operated and
stopped with one
controller.
Note) Up to eight
Unified ON/OFF
controllers can be
connected within
a system
[Schedule timer]
Up to 128 units can
be controlled on a
weekly schedule.
※1. When the ventilation mode is changed, the fan temporarily stops and then start again.
※2. Ventilation rate and mode can be switched with DCS302CA61.
22
System overview
Heat Reclaim Ventilator Unit
Remote controller
Heat Reclaim Heat Reclaim
Indoor unit Ventilator Unit Ventilator Unit
Remote controller Maximum total number of units:
16 units
Indoor unit
Indoor unit
• Unified ON/OFF
Remote controller
Remote
controller
• Schedule timer
controller
• Central remote
controller
Heat Reclaim Heat Reclaim
Ventilator Unit Ventilator Unit
Remote
controller
Maximum total number of groups:
64 groups
Control method
Control equipment
※1
※2
— — — 〇 〇 〇 〇 〇
— — — — 〇 〇 〇 〇
〇 〇 〇 〇 — 〇 〇 〇
EDMMT712101
● Field settings are required.
Functions
〇 〇 — — ● ● ●
〇 〇 ● ● — 〇 ● ●
〇 〇 — — ● ● ●
VAM-HVE/HVLT Series