Furuno 1824C Installation Manual page 59

42. Press the NEXT key, and the DATA4 (PC/NMEA/EXT. BUZZ) port setup menu appears.
Set up this port similar to how you set up the DATA2 port.
NMEA OUTPUT FORMAT
BAUD RATE
BIT LENGTH
STOP BIT
(CONTROL: Xon/Xoff)
Installation wizard, DATA4 (PC/NMEA/EXT. BUZZ) port setup menu
Item
Output Format Selects NMEA output version for the
equipment connected.
Baud Rate Sets baud rate.
Lat/Lon Format Selects latitude/longitude format to
output.
XTE Format Selects number of XTE digits to output.
Output Selects whether to output route (data
Destination sentence RTE) and waypoint data (data
sentence WPL) when destination is set.
PORT MNITR Use this key to view which sentences are being output. See the example below.
(soft key)
1
Auto detection of baud rate of connected equipment. For use only with device having
*
"AUTO" feature.
2
* Choose 38400 bps when connecting an AIS Interface or AIS Transponder to the DATA2
port.
$GPGLL,3415.2345,N,13520.5301,E,152500.00
,A*E7<CR><LF>$GPGLL,3415.2345,N,135
20.5301,E,152500.00,A*E7<CR><LF>$GPGLL
,3415.2345,N,13520.5301,E,152500.00,A*
E7<CR><LF>$GPGLL,3415.2345,N,13520.530
1,E,152500.00,A*E7<CR><LF>$GPGLL,3415.
2345,N,13520.5301,E,152500.00,A*E7<CR>
<LF>$GPGLL,3415.2345,N,13520.5301,E,15
2500.00,A*E7<CR><LF
Installation wizard, port monitor display
NMEA VER. 2.0
4800 bps
8 bits
1 bit
Description of items in "port" menus
Description
3-13
Settings
NMEA0183 Ver. 1.5,
NMEA0183 Ver. 2.0
DATA2 port:
1
AUTO* , 4800,
2
38400* (bps)
DATA4 port: 4800,
9600, 19200 (bps)
DD°MM.MM',
DD°MM.MMM',
DD°MM.MMMM'
X. XX, X. XXX
Yes, No
Default Setting
NMEA0183 Ver.
2.0
4800 bps
DD°MM.MMM'
X. XX
No