Arp, Ttm Target Data - Furuno NAVNET 1734C Operator's Manual

2. RADAR OPERATION

2.25.7 ARP, TTM target data

You can show motion trends (range, bearing, course, speed, CPA and TCPA) for ARP or
TTM targets.
1. Place the cursor on the target whose data you want to see.
2. If not already displayed, press the HIDE/SHOW key to show the radar soft keys.
3. Press the TARGET and TARGET INFO soft keys. The data of the selected target
appears at the bottom left-hand corner of the display. (If an EBL/VRM data box is
displayed the ARP (TTM) data box will be under it.)
4. Press the RETURN soft key to finish.
To erase ARP/TTM target data, select the corresponding target with the cursor, then press
the CLEAR key.
Cursor
2-34
.250/ .125nm
SP
H-UP
ARP
01
Target
No.01 VECTOR TRUE 15min
CSE 359.9 T SPD 12.5kt
CPA 2nm TCPA 12.35
CPA and TCPA
Course and Speed
Target No., Vector Reference (True), Vector Time
ARP target data
319.9
T
TARGET
+
TRAIL
TLL
OUTPUT
ACQ
TARGET
INFO
RETURN
359.9 R
+
0.240nm