Furuno NAVNET 1734C Operator's Manual page 182

Menu Item
OFF
ADD: ADD NEW WPT
MWP: MOVE WPT
RUL: RULER
GWP: GOTO WPT
GRT: GOTO ROUTE
EML: EDIT MK/LINE
TRK: TRACK ON/OFF
TTM: TTM ON/OFF
DTT: DEL TGT TRACK
ALP: ALPHA LIST
LCL: LOCAL LIST
RTE: ROUTE LIST
DBX: D. BOX ON/OFF
CHG: CHANGE CNTRL
QP: QUICK POINT
MRK: MARK ENTRY
Note: To use CHANGE CNTRL set it on all displays, with the same soft key number.
Plotter function keys
Function
Assigns no function.
Registers waypoint at cursor position. Place cursor
for waypoint location, then press function key.
Moves selected waypoint to different position.
Select waypoint, press function key, select new
position, then press the ENTER knob.
Measures range and bearing between two points.
Press START POINT soft key to change starting
point if necessary. Range and bearing between two
points appears at the top of the screen.
Specify waypoint to set as destination. Enter
waypoint name in window, then press the ENTER
soft key.
Specify route to follow. Enter route name in window,
then press the ENTER soft key.
Displays mark & line menu. Press appropriate soft
key to access menu item.
Each press starts or stops recording/plotting own
ship's track.
Turns TTM (target track) display on/off.
Erases all TTM track.
Displays waypoint alphanumeric list.
Displays waypoint local list.
Displays route list.
Shows/hides data boxes.
Changes control in combination screen.
Quick point function
Enters the mark at the cursor position.
7. CUSTOMIZING YOUR UNIT
Function Key
Label
—
ADD
MWP
RUL
GWP
GRT
EML
TRK
TTM
DTT
ALP
LCL
RTE
DBX
CHG
QP
MRK
7-13