Furuno NAVNET 1734C Operator's Manual page 178

4. Select function desired with the Cursor pad, then press the ENTER soft key or ENTER
knob to register your selection.
5. Press the MENU key to close the menu.
Menu Item
OFF
HL: HDG LINE OFF
MOD: MODE
GAI: GAIN
SEA: A/C SEA
RAI: A/C RAIN
FTC: FTC
ES: ECHO STRETCH
PLS: PULSE LENGTH
ZOM: ZOOM
OFC: OFFCENTER
TRL: ECHO TRAIL
RNG: RINGS ON/OFF
TLL: TLL OUTPUT
ALM: GUARD ALARM
EBL: EBL
VRM: VRM
TTM: TTM ON/OFF
WMK: WPT ON/OFF
WTM: WATCHMAN
ACQ: ACQUISITION
TX: STBY/TX
RSR: RADAR SOURCE
DBX: D. BOX ON/OFF
CHG: CHANGE CNTRL
QP: QUICK POINT
MRK: MARK ENTRY
Note: To use CHANGE CNTRL set it on all displays, with the same soft key number.
Radar function keys
Function
Assigns no function.
Turns heading line off.
Selects presentation mode.
Shows gain sensitivity adjustment window.
Shows A/C SEA adjustment window.
Shows A/C RAIN adjustment window.
Displays FTC window. Available with Model 1700
series radar. Inoperative otherwise.
Turns echo stretch on/off.
Sets pulselength (long or short).
Turns zoom on/off.
Press to shift display center to cursor location.
Press again to turn shift off and return cursor to
display center.
Starts/stops echo trails.
Turns range rings on/off.
Outputs cursor position, in NMEA format, to
navigator.
Displays alarm soft keys.
Switches control between EBL1 and EBL2 with
each press.
Switches control between VRM1 and VRM2 with
each press.
Turns TTM (Tracked Target Message) display
on/off.
Turns waypoint marker on/off.
Turns watchman on/off.
Acquires and tracks cursor-selected target.
(Requires ARP-equipped Model 18x4/19x4 series
network radar.)
Toggles between standby and transmit
Selects source for radar picture.
Turns data boxes on/off.
Changes display control in combination display.
Quick point function
Enters the mark at the cursor position.
7. CUSTOMIZING YOUR UNIT
Function Key
Label
—
HL
MOD
GAI
SEA
RAI
FTC
ES
PLS
ZOM
OFC
TRL
RNG
TLL
ALM
EBL
VRM
TTM
WMK
WTM
ACQ
TX
RSR
DBX
CHG
QP
MRK
7-9