Inserting Waypoints - Furuno NAVNET 1734C Operator's Manual

8. Press the F R soft key to select direction to follow the waypoints of the route,
forward or reverse.
9. Enter the route name of the second route as you did for the first route.
10. Press the SAVE soft key.
11. Press the MENU key to close the menu.
Note: The maximum number of waypoints in a route is 35. If this number is exceeded an
error message appears. In this case, delete waypoints in one or both routes so the total
number of waypoints does not exceed 35.

3.9.3 Inserting waypoints

Waypoints can be inserted in a route as follows:
Inserting a waypoint from the route list
1. Press the MENU key to open the menu.
2. Press the WAYPOINTS/ROUTES soft key.
3. Press the ROUTES soft key.
4. Use the Cursor pad to select a route.
5. Press the EDIT ROUTE soft key. The route name screen appears.
6. Press the LOCAL LIST soft key.
ROUTE NAME:
COMMENT:
01
001WPT
02
003WPT
03
002WPT
04
005WPT
05
008WPT
7. Use the Cursor pad to place the cursor at the location
where you want to insert a waypoint.
8. Press the INSERT WPT or CHANGE WPT soft key as
appropriate. The local waypoint list appears.
9. Use the Cursor pad to select the waypoint you want to
insert. (You can switch between the local list and
alphanumeric list by using the LOCAL LIST and ALPHA
LIST soft keys.)
10. Press the SELECT WPT or CHANGE WPT soft key,
whichever is displayed.
11. Press the MENU key to close the menu.
EDIT
001
ROUTE
INSERT
34 44.111'N LEG
WPT
135 21.134'W
29.9
12.0nm
34 43.432'N
REMOVE
135 41.456'W
WPT
159.9
6.00nm
34 14.124'N
135 21.567'W
CHANGE
50.5
WPT
29.8nm
34 44.569'N
135 21.152'W
359.9
COORD
3.0nm
34 54.124'N
TYPE
135 21.888'W
RETURN
Edit route menu
3. PLOTTER OPERATION
LOCAL LIST
001WPT
001
34 44.111'N
135 21.134'W
002WPT
002
34 43.432'N
135 41.456'W
003WPT
003
34 14.124'N
135 21.567'W
004WPT
004
34 34.490'N
135 51.387'W
Waypoint list for editing a
route (local list)
3-39