Avaya S8500B Manual page 4

Job Aid: Replacing the SAMP on the S8500B Media Server
Figure 1: Locating the media server cover's captive screw
Figure notes:
1. Media server cover's captive screw
2. Slide the media server cover back from the front panel until the cover's tabs are released
from the top slot of the front panel.
3. Lift the cover straight up and move it away from the media server.
Removing and replacing the SAMP card
The SAMP card resides in PCI-X slot 1 located under the PCI support bracket. To remove the
PCI support bracket and the riser connector:
1. Loosen the captive screw on the SAMP riser-card assembly as shown in
Figure 2: Removing/replacing the SAMP card
4 Replacing the SAMP in the S8500B Media Server
h3dscapb KLC 093004
on page 5.
1