Avaya S8500B Manual page 13

Figure 7: CAT5 cables connected to a port on the rear of the Avaya S8500B Media Server
Figure notes:
1.
Eth0 — to customer's network if
nondedicated control network
(straight-through CAT5 cable)
2.
Eth1 — to services laptop
(cross-connect CAT5 cable)
The SAMP also communicates with the host in-band through an onboard, industry-standard
Ethernet controller on the host's PCI bus with an internal link to the SAMP as shown in
Figure 8: S8500B and SAMP connections and network interfaces
2
1
1
2
1
2
3.
4.
Media server connections
4
h3msbl5a KLC 093004
3
Eth2 — to port network if only one port
network (cross-connect CAT5 cable) or to
customer's network if dedicated control
network (straight-through CAT5 cable)
Eth3 — not used
on page 14.
03-300323 Issue 1 January 2005 13