Avaya S8500B Manual page 3

3. Click on the Shutdown button at the bottom of the page.
The Shutdown This Server page displays the shutdown indicators.
4. Wait until the server powers down before proceeding.
Removing the media server from the rack
To remove the media server:
1. Label and disconnect all cables on the media server.
2. Loosen the two front thumbscrews on the media server.
!
CAUTION:
The media server is not on rails. When removing the media server from the rack,
CAUTION:
be sure to have a good grip so that it does not fall.
3. Carefully pull the media server from the rack.
Removing the cover of the media server
!
CAUTION:
All power must be removed from the media server before starting this procedure.
CAUTION:
ELECTROSTATIC ALERT:
Take precautions against electrostatic discharge: wear a wrist strap connected to
ELECTROSTATIC ALERT:
an approved ground.
To remove the cover from the media server:
1. Loosen the captive screw on the rear of the media server to the right of the slot labeled
PCI 1 (see Figure 1: Locating the media server cover's captive screw
Removing the media server from the rack
on page 4).
03-300323 Issue 1 January 2005 3