Replacing The Fuses - Yamaha XRS900 Series Owner's Manual

Periodic maintenance and adjustment
the main switch off, then con-
1
nect the positive lead before
connecting
2
lead.
[ECA16842]
4. After installation, make sure that
the battery leads are properly con-
3
nected to the battery terminals.
4
NOTICE
Always keep the battery charged.
5 Storing a discharged battery can
cause permanent battery damage.
6
7
8
9
10
11
12

Replacing the fuses

the negative
Fuse box 1 is located behind the right
side panel.
To access fuse box 1, remove and in-
stall the right side panel and rubber
cover as follows.
1. Remove the nuts and bolt.
ECA16531
1. Right side panel
2. Nut
3. Bolt
2. Pull the right side panel and rubber
cover off as shown.
EAU73340
2
3
1
6-30
2
1. Fuse box 1
2. Rubber cover
1