Yamaha XRS900 Series Owner's Manual page 38

Instrument and control functions
1
1
2
3
(a) (b)
4
5
1. Spring preload adjusting bolt
The spring preload setting is deter-
6
mined by measuring distance A, shown
in the illustration. The shorter distance
A is, the higher the spring preload; the
7
longer distance A is, the lower the
spring preload.
8
9
1
10
11
12
1. Distance A
Spring preload setting:
1
Minimum (soft):
Standard:
Maximum (hard):
(a) (b)
Rebound damping force
The rebound damping force is adjusted
on the right fork leg only.
Turn the adjusting screw in direction (a)
to increase the rebound damping force.
Turn the adjusting screw in direction (b)
to decrease the rebound damping
force.
To set the rebound damping force, turn
the adjuster in direction (a) until it stops,
and then count the clicks in direction
(b).
Distance A = 19.0 mm (0.75 in)
Distance A = 16.0 mm (0.63 in)
Distance A = 4.0 mm (0.16 in)
3-23
1
(a) (b)
1. Rebound damping force adjusting screw
Rebound damping setting:
Minimum (soft):
12 click(s) in direction (b)
Standard:
7 click(s) in direction (b)
Maximum (hard):
1 click(s) in direction (b)
TIP

When turning the damping force
adjuster in direction (a), the 0 click
position and the 1 click position
may be the same.

When turning the damping force
adjuster in direction (b), it may click
beyond the stated specifications,
however such adjustments are in-
effective and may damage the