Replacing The Headlight Bulb - Yamaha XRS900 Series Owner's Manual

Replacing the headlight bulb

This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
Do not touch the glass part of

the headlight bulb. Otherwise
the luminosity and the life of the
bulb may be adversely affected.
Thoroughly clean off any dirt,

oil, or fingerprints from the bulb
using a cloth moistened with al-
cohol or thinner.
Do not use a headlight bulb of a

wattage higher than specified.
Do not affix any type of tinted

film or stickers to the headlight
lens.
Periodic maintenance and adjustment
EAU34387
ECA26690
1. Do not touch the glass part of the bulb.
1. Remove the headlight unit by re-
moving the bolts on each side.
1
1. Bolt
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
1. Headlight bulb cover
2. Headlight coupler
1. Headlight bulb holder
2. Headlight bulb
6-33
2
1
3. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1
2
4. Place a new headlight bulb into po-
1
2
3
4
5
6
7
8
9
10
11
12