Brake/Tail Light; Replacing A Turn Signal Light Bulb - Yamaha XRS900 Series Owner's Manual

Brake/tail light

This model is equipped with an
LED-type brake/tail light.
If the brake/tail light does not come on,
have a Yamaha dealer check it.
Periodic maintenance and adjustment
EAU70540
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
EAU24205
1
1. Turn signal light bulb
6-35
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11192]
1
1
2
3
4
5
6
7
8
9
10
11
12