Yamaha XRS900 Series Owner's Manual page 23

This display indicates which drive
mode has been selected: "STD", "A" or
"B". For more details on the modes and
on how to select them, see pages 3-12
and 3-14.
TCS display
1. TCS display
This display indicates which traction
control system setting has been select-
ed: "1", "2" or "OFF". For more details
on the TCS settings and on how to se-
lect them, see page 3-16.
Instrument and control functions
Multi-function display
1. Multi-function display
The multi-function display is equipped
with the following:

an odometer

two tripmeters

a fuel reserve tripmeter

an instantaneous fuel consump-
tion display

an average fuel consumption dis-
play

a coolant temperature display

an air temperature display

a clock

a brightness level display
The odometer "ODO" shows the total
distance the vehicle has traveled.
3-8
The tripmeters "TRIP" show the dis-
tance traveled since they were last re-
set.
To reset a tripmeter, select it by push-
ing the bottom set button. The tripmeter
will flash for a few seconds. While the
tripmeter is flashing, push the top set
button until the display is reset.
1
TIP

The odometer will lock at 999999.

The tripmeters will reset and con-
tinue counting after 9999.9 is
reached.
Changing the display item
Push the bottom set button to switch the
display between odometer "ODO", trip-
meters "TRIP 1" and "TRIP 2", instanta-
neous fuel consumption "km/L" or "L/100
km", average fuel consumption "AVE_
_._ km/L" or "AVE_ _._ L/100 km", cool-
ant temperature "_ _ C", ambient tem-
perature "Air_ _ C", and clock "_ _:_ _"
in the following order:
ODO  TRIP 1  TRIP 2  (TRIP F)
 km/L or L/100 km  AVE_ _._ km/L
or AVE_ _._ L/100 km  _ _ C  Air_
1
2
3
4
5
6
7
8
9
10
11
12