amount of fuel necessary to travel
100 km.
"AVE_ _._ MPG": The average
distance that can be traveled on
1.0 Imp.gal of fuel.
To switch the average fuel consump-
tion display settings, push the bottom
set button until the display changes.
To reset the average fuel consumption,
select it by pushing the bottom set but-
ton. The average fuel consumption dis-
play will flash for a few seconds. While
the display is flashing, push the top set
button until the display is reset.
TIP
After resetting the average fuel con-
sumption, "_ _._" will be shown until the
vehicle has traveled 1 km (0.6 mi).
Instrument and control functions
Coolant temperature
1. Coolant temperature display
This display shows the coolant temper-
ature from 40 C to 116 C in 1 C incre-
ments.
If the message "HI" flashes, stop the
vehicle, then stop the engine and let it
cool. (See page 6-39.)
TIP
When the coolant temperature is
below 40 C, "Lo" will be displayed.
The coolant temperature varies
with changes in the weather and
engine load.
3-10
Air temperature
1
1. Air temperature display
This display shows the air temperature
from –9 C to 99 C in 1 C increments.
The temperature displayed may vary
from the actual ambient temperature.
TIP
When the air temperature is below
–9 C, "Lo" will be displayed.
The accuracy of the temperature
reading may be affected when rid-
ing slowly (under 20 km/h [12 mi/h])
or when stopped at traffic signals,
railroad crossings, etc.
1
2
3
1
4
5
6
7
8
9
10
11
12