Luggage Strap Holders - Yamaha XRS900 Series Owner's Manual

Instrument and control functions
to increase the rebound damping force.
1
Turn the adjusting screw in direction (b)
to decrease the rebound damping
2
force.
To set the rebound damping force, turn
the adjuster in direction (a) until it stops,
3
and then count the turns in direction (b).
4
5
6
7
1. Rebound damping force adjusting screw
8
Rebound damping setting:
9
Minimum (soft):
3 turn(s) in direction (b)
Standard:
10
1-1/2 turn(s) in direction (b)
Maximum (hard):
0 turn(s) in direction (b)
11
TIP
12
When turning the damping force adjust-
er in direction (b), it may turn beyond
the stated specifications, however such
adjustments are ineffective and may
damage the suspension.
WARNING
This shock absorber assembly con-
tains highly pressurized nitrogen
gas. Read and understand the fol-
lowing information before handling
the shock absorber assembly.
(b) 1 (a) Do not tamper with or attempt to

open the cylinder assembly.
Do not subject the shock ab-

sorber assembly to an open
flame or other high heat source.
This may cause the unit to ex-
plode due to excessive gas
pressure.
Do not deform or damage the

cylinder in any way. Cylinder
damage will result in poor
damping performance.
Do not dispose of a damaged or

worn-out shock absorber as-
sembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.

Luggage strap holders

EWA10222
1. Luggage strap holder
Use the indicated strap points to secure
luggage ties to the vehicle.
3-25
EAU84680
1